503.667.0650

P-100 Edge Grip system

consists of 4mm solid core composite material with extruded aluminum attachment moldings.

Features/Benefits

  • Extruded aluminum Edge Grip molding painted to match or contrast panel
  • No exposed fasteners
  • Little or no maintenance required

4mm composite panels

  • Polyethylene or fire-rated core
  • Pre-finished or anodized aluminum
  • Copper
  • Stainless steel
  • Zinc
  • Other materials upon request

P-100 Edge Grip panel systems

tested to meet the following:

  • AAMA 501 standards including:
    • ASTM E283 Air penetration
    • ASTM E331 Water penetration
  • ASTM E330 Structural performance
  • AAMA 501.4 Seismic movement

P-100 Edge Grip panels

are available in these sizes

  • Maximum panel size 5’2” x 16’4”
  • Optimum panel widths 62”, 31”, 20”
  • Optimum panel lengths 196”, 98”, 65”, 49”

Weight

4mm composite panel with extrusion on average 1.2 lbs psf

Download

P-200 PER

is a pressure equalized rain (PER) screen system that is manufactured with a 4 mm composite panel attached to a concealed extruded aluminum frame.

Features/Benefits

  • 6063 structural aluminum frame
  • Floating clip system
  • All exposed surfaces from same composite coiled coated material
  • No exposed fasteners
  • Little or no maintenance required

4mm composite panels

  • Polyethylene or fire-rated core
  • Pre-finished or anodized aluminum
  • Copper
  • Stainless steel
  • Zinc
  • Other materials upon request

P-200 PER panel systems tested to meet the following:

  • AAMA 501 standards including
    • ASTM E283 Air penetration
    • ASTM E331 Water penetration
  • ASTM E330 Structural performance
  • AAMA 501.4 Seismic movement
  • AAMA 508-07 Pressure Equalization
  • ASTM E1233-06 Structural performance

P-200 PER panels available in these sizes.

  • Maximum panel size 4’10” x 16’
  • Optimum panel widths 58”, 27”, 16”
  • Optimum panel lengths 192”, 94”, 61”, 45”

Weight

4mm composite panel with extrusion on average 2.5 psf

Download

Our P-100 EG and P-200 PER  panel systems contribute to the following LEED credits:

  • ID 1.1-1.4-Highly durable or innovative finishes
  • MR 4-Recycled content
  • MR 5-Regional Manufacturing
  • NC 2-New Construction Waste Management

Installer Qualification Program

Qualifying to install our panel system will require each person to attend a mandatory training class.  At the start of each project, a manufacturer’s rep will be on site to ensure proper installation. 

At minimum, 1 inspection will be performed midway through the project with a final inspection scheduled at project completion.